you need to check the tx valve and see if it is working if the system doesn't have enough gas it won't switch on
I turned on my climate control today and had no cooling.
When I got home I found that the compressor was not rotating. I checked fuse # 6 (5 &7) too nothing wrong there.
Any one got any ideas Please?
you need to check the tx valve and see if it is working if the system doesn't have enough gas it won't switch on
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
Thank you Outback. How do I check the TX valve.?
Regards Nick.
remove the grille the tx valve is located passenger side on the drier if you take a test light connect it to earth and test the wires (ignition and a/c on )you should hear the compressor clutch activate if it does then your issue is low gas
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
Thanks yet again Outback
The tx valve is inside the dash, I think (respectfully) outback is referring to the dual pressure switch.
Disconnect both wires and check the contacts should be closed
Regards
It's not in "econ" mode is it?
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks