Connect cable to nanocom then connect to the car and turn the ignition on. You will need it running if you want to use the instrument mode
Sent from my SM-G900F using AULRO mobile app
The Nanocom arrived this morning and I had a quick look before rushing off to work.
I know that I have to connect the cable in a particular order.
Is the ignition turned on? or engine running?
Or do I connect it and then start up the engine?
Thanks
Julian
Connect cable to nanocom then connect to the car and turn the ignition on. You will need it running if you want to use the instrument mode
Sent from my SM-G900F using AULRO mobile app
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
But first easiest to use the usb cord to power up inside whilst you follow the activation procedure.
Cheers
Simon
2003 D2a TD5, ACE, SLS, Vienna Green.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks