Results 1 to 5 of 5

Thread: Advice re: Multiple electronic issues

  1. #1
    Beema41 Guest

    Advice re: Multiple electronic issues

    Hey all, this is my first posting relating to my first Land Rover so here goes;

    I bought the Discovery Series 2, 2003 TD5 Auto with 135km, one owner and it shows, despite the driver's window breaking in the first 10 minutes.

    However today some things developed that have me confused and very concerned;

    As I returned to the car after picking up the kids from school, the brake lights were on? I thought I had left the car unlocked or something sinister, but No. The car was locked.

    I opened the driver's door and pumped the pedal, thinking it was the switch but still they remained on? I put the key into ignition and turned it on, the warning lights did their thing then all but two went out.

    The W and S flashed?

    I turned off the ignition and closed the door. I couldn't figure out what was going on. I locked the truck and then unlocked it again. I turned the ignition on and the lights cleared, all of them this time.

    I then went to the back of the truck and the brake lights were still on. I decided to drive home.

    No issues driving home and then I parked the truck in the drive. I locked it and went to the rear, the lights were out?

    So after exploring these forums I've got the following things that could be an issue;

    Low battery: Battery was replaced 6 months ago.

    Brake Light Switch: Yet to be investigated.

    Inhibitor Switch: Yet to be investigated.

    Wiring Loom: Yet to be investigated.

    ECU/BCU: Yet to be investigated.

    I hope all this doesn't mean that somewhere sometime the truck is going to stop and let me down?

    I am so impressed with its ride and smoothness on the road.

    Please can someone tell me I made a good choice!

  2. #2
    Join Date
    Feb 2014
    Location
    Diamond Creek Victoria
    Posts
    1,192
    Total Downloaded
    0
    You made a good choice.

  3. #3
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    The W and S flashed?
    AFAIK there is no W light.
    The M and S lights flash when the battery is low.
    Just google Discovery 2 M and S lights.
    Check all your earths and terminals are clean.

    Regards Philip A

  4. #4
    alien's Avatar
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0
    Easy way to test the brake light switch is to unplug it and check the lights.

    The other thought I had was if there is a trailer plug maybe a wire is loose in it causing a short.
    Cheers, Kyle



    The Good Oil.
    When did you last visit?
    http://www.aulro.com/afvb/good-oil/



  5. #5
    Join Date
    May 2007
    Location
    Australia
    Posts
    2,827
    Total Downloaded
    0
    Don't get stressed over BCU wiring or XYZ switches.
    1/ XYZ switch. - if the indicator on the dash display matches what is selected on the shifter, the switch is ok.-also unlikely associated with brake lights.
    2/ BCU- won't be associated with brake lights.
    3/wiring loom- possible chafing but unlikely for Kms - let's leave this for the moment until other avenues sorted.
    4/M S lights flashing is an indicator of low voltage and not a definitive indication of poor battery condition. Quite likely to be present after brake lights being on for a sustained period as battery will have had capacity reduction from the lights being on. After you drove home, the battery would have been recharged enough to avoid the M S lights.

    5/ brake light switch- best place to start- most likely culprit disconnect the plug and test the switch.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!