Thread: Random issues

Should be half prerry much on the hammer...will stay there from about 60 degrees to an engine cooking 120. Get an Ultraguage or similiar.

Trickling - air in heater matrix.

Fan probably paper fallen behind glove box.

Cheers

Sweet thanks for the reply.

Electronic temp gauge,unfortunately doesn't react to an overheating engine very well.An 'engine saver' is the way to go.A search on here will explain.

Air in heater matrix,system needs a good bleed,search on here will explain all.It needs to be done a certain way.
Needs to be done ASAP or may damage head if left as is.

Good luck with it all.

1. - yes normal
2. - don't know
3. - don't know
4. - the 9ltr is for a total refil.. It's 5 ltr with a drain from sump service, as the rest is still in lines, etc.

1: as mentioned will sit at half from 70 - 120 degrees
2: water noise , air in system either requires just bleeding ( good) to head gasket ( not so good )
3:leaf or debris from not having any filter material left in a/c intake
4:as mentioned 9 litres is dry fill , 5 litres for a service , if you get a ryco kit the part number is rtk 30 from memory

thanks guys - have the gearbox service kit coming filter seals etc.

Will search to bleed the system and check that out

for temp there are a few options i can see after searching around last night will have to see which one is the most preferred device for the job.

Hopefully an easy fix for the ticking too!

thanks again