Ok and i get an new gasket and oring yeah?
Printable View
Ok and i get an new gasket and oring yeah?
No gaskets, regulator only.
Part numbers are
MSX100080 Gasket Early type
MSX000010 Gasket Late type
ERR6761 Oring
MAE100010 Strainer if needed.
OK thanks, on an unrelated note, my disco went onto an hoist and now the SLS is deflated and wont pump up
I ran into troubles when i fitted a kit to mine, the gasket supplied wouldn't seal. Apparently there is an early regulator and a late regulator which look the same but have different gaskets. i was lucky and the old gasket was reused, and sealed, they are a once use only gasket.
Were they careful about where they lifted it? The compressor is on the chassis rail below the front passenger door, in a plastic case.Quote:
Originally Posted by Yakuza
Well I think it has something to do with the height sensors
As its has an 40mm lift in the back but not extended height sensors
I have fitted several with no problems whatsoeverQuote:
Originally Posted by Roverlord off road spares
Sent from my SM-G900I using AULRO mobile app
As I said they can be hit or miss, you are part of the lucky hit fraternity.:)Quote:
Originally Posted by Outback 1
Well i fitted some extensions for the sensor and it seems to be working ok