Thread: Odometer flashing

You can fix with Test book or Nano etc. I have gotten used to mine!

sounds like the odometer and bcm have different K`s on them , there is a setting in the nano that you can make the BCM not check the dash Kilometres , Your car maybe has had the dash swapped .

As Rob has mentioned, the IP cluster has been changed out, it needs to be set with a diagnostic tool of some description...

While thats a vague answer, beside the Land Rover diagnostic tool and the Snap-on tool (both of which will set the IP cluster) I've not used any other for that.

Regards
Daz

How many K`s has your car got ?
Will be interesting as my ODO says 195,000 but BCM shows 293,000 ,,
Another dodge from the seller

The "odometer error warning" must be disabled with dedicated tester in BCU settings that's all.

as about that:

One wouldn't go what wouldn't go away which says engines be has exceeded parameters or something like that any help

IMO better find other mechanic

Originally Posted by rob tilbury

...BCM shows 293,000

it's BCU not BCM , important is how do you know it shows that figure cos AFAIK there's no link between any tester ant that memory

Originally Posted by DazzaTD5

As Rob has mentioned, the IP cluster has been changed out,

Nope. Mine did it all by itself, after I had the car about three years.

It's possible if a speedo corrector was connected after the BCU.