Reply With QuoteThe BCU is behind the passenger glove box. I would have thought you would've had a reply from some of the more experienced ones here.
RAVE might help.
My 2000 disco Drivers Window stopped working but all other windows work. I've tested the switch which is ok.There is a clicking sound coming from the glove box area. I have read that it's possibly ECU or BDU unit does anyone have some advice please?
YarnMaster
SubscriberThe BCU is behind the passenger glove box. I would have thought you would've had a reply from some of the more experienced ones here.
RAVE might help.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
YarnMaster
SubscriberThe electric block diagram from RAVE has a rhs front switch and motor connected to the BCU. The only relay is for the rear windows.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
Swaggie
Pop the trim off more than likely the window regulator as they have dumb plastic slides. If it has not bent the regulator up too bad you can buy door rollers from Bunnings drill some holes fit the rollers all goodOriginally Posted by Gormo
YarnMaster
+1^^^ ...or chaffed wiring where the loom meets the door frame
Discovery Td5 (2000), manual, tuned
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks