Results 1 to 5 of 5

Thread: Rhino rack rl210 differences

  1. 28th April 2017, 07:59 PM #1
    Mclaren00's Avatar
    Mclaren00
    Mclaren00 is offline Master
    Join Date
    Mar 2017
    Location
    Brisbane
    Posts
    199
    Total Downloaded
    0

    Rhino rack rl210 differences

    Hi looking at the 210mm racks but on website there is 3 or 4 versions and for life of me can't figure out what is different about them
    Anyone recently bought some and know?
    Reply With Quote Reply With Quote
  2. 3rd May 2017, 09:26 AM #2
    Fluids's Avatar
    Fluids
    Fluids is offline YarnMaster Subscriber
    Join Date
    Mar 2009
    Location
    Port Stephens N.S.W
    Posts
    3,158
    Total Downloaded
    0
    I think the legs are all the same. The difference is in the bracket/clamp that attaches to the bottom of the leg ... determined by the gutter that the clamp has to be secured against.

    RL210 legs will need scalloping the inside edge to follow the roof curvature and you'll probably need 2 x 10mm spacers for the top of each leg to get the cross bars to clear the roof. This is how mine was done.

    There's pictures in my gallery.

    Message - AULRO Photo Gallery
    Kev..

    Going ... going ... almost gone ... GONE !! ... 2004 D2a Td5 Auto "Classic Country" Vienna Green

    2014 MUX LST with fruit
    2015 Kimberley Kamper "Classic"
    Reply With Quote Reply With Quote
  3. 3rd May 2017, 04:45 PM #3
    Mclaren00's Avatar
    Mclaren00
    Mclaren00 is offline Master
    Join Date
    Mar 2017
    Location
    Brisbane
    Posts
    199
    Total Downloaded
    0
    Cheers mate
    Picked up a near new set of 3 for $230 bucks so will scallop them and get some of those spacers
    Photos are perfect appreciate the tip!!
    Reply With Quote Reply With Quote
  4. 3rd May 2017, 04:52 PM #4
    Mclaren00's Avatar
    Mclaren00
    Mclaren00 is offline Master
    Join Date
    Mar 2017
    Location
    Brisbane
    Posts
    199
    Total Downloaded
    0
    Quote Originally Posted by Fluids View Post
    I think the legs are all the same. The difference is in the bracket/clamp that attaches to the bottom of the leg ... determined by the gutter that the clamp has to be secured against.

    RL210 legs will need scalloping the inside edge to follow the roof curvature and you'll probably need 2 x 10mm spacers for the top of each leg to get the cross bars to clear the roof. This is how mine was done.

    There's pictures in my gallery.

    Message - AULRO Photo Gallery
    You need to scollop all 6 Hey
    Was just looking at the roof
    Reply With Quote Reply With Quote
  5. 3rd May 2017, 08:27 PM #5
    Fluids's Avatar
    Fluids
    Fluids is offline YarnMaster Subscriber
    Join Date
    Mar 2009
    Location
    Port Stephens N.S.W
    Posts
    3,158
    Total Downloaded
    0
    Quote Originally Posted by Mclaren00 View Post
    You need to scollop all 6 Hey
    Was just looking at the roof
    No, just the 4 x back ones. The front 2 x can be left alone. 2 x spacers won't allow the middle bar to clear the roof rails, don't know if you can see it in the photos, so I just snugged the middle bar up against the rear end of the roof rails. Sits above the c-pillar.
    Kev..

    Going ... going ... almost gone ... GONE !! ... 2004 D2a Td5 Auto "Classic Country" Vienna Green

    2014 MUX LST with fruit
    2015 Kimberley Kamper "Classic"
    Reply With Quote Reply With Quote
« TD5 Sump Plug Thread damaged. | bolts for acoustic cover »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!