Results 1 to 7 of 7

Thread: TD5 cracked block !!

  1. 5th December 2017, 02:35 PM #1
    Keppmeister
    Keppmeister is offline Fossicker
    Join Date
    Jan 2017
    Location
    Maitland
    Posts
    16
    Total Downloaded
    0

    TD5 cracked block !!

    I have been stripping down the Disco chasing the cause of running rough and lots of coolant in the sump. Head came off and went for pressure tests IMG_6370.jpgIMG_6373.jpgIMG_6377.jpgIMG_6379.jpg

    Next oil cooler apart to inspect and resealIMG_6390.jpg
    IMG_6391.jpgIMG_6392.jpg

    Next checking the bores and measure piston protrusions. Here is where I found a big problem . Number 1 Piston has no protrusion. So bent con rod I recon . Next while inspecting bore found a large crack between bore and coolant gallery. This is where all the coolant is getting in.
    IMG_6374.jpgIMG_6383.jpgIMG_6385.jpgIMG_6389.jpg

    So I’m thinking head gasket went , cylinder filled and hydraulic locked causing damage TD5 cracked block !!
    So I guess the block is a boat anchor now . Any one had one repaired with a liner ?
    Any TD5 bottom ends for sale ??
    Reply With Quote Reply With Quote
  2. 5th December 2017, 05:38 PM #2
    Lemo's Avatar
    Lemo
    Lemo is offline Master
    Join Date
    Dec 2016
    Location
    New Lambton, NSW
    Posts
    698
    Total Downloaded
    0

    TD5 cracked block !!

    There's this

    TD5 - Bindoon WA 6502

    - TD5 - Bindoon WA 6502
    Reply With Quote Reply With Quote
  3. 5th December 2017, 07:36 PM #3
    worane
    worane is offline Master
    Join Date
    Oct 2012
    Location
    lethbridge
    Posts
    785
    Total Downloaded
    0
    When I did an oil pump bolt I bought a whole engine in good running condition for $2200.00 in Melbourne.
    The car had been rear ended
    It turned out to be a good buy. Changed it out my self in a very oily week.
    Regards, Nick.
    Reply With Quote Reply With Quote
  4. 5th December 2017, 09:55 PM #4
    shack
    shack is offline ChatterBox Supporter
    Join Date
    Jun 2013
    Location
    Universe A
    Posts
    2,645
    Total Downloaded
    0
    We linered one a couple years ago, had been dusted pretty bad on number one and a 20 thou oversize wouldn't get it, so linered number one, have done another 110k since with no drama (with the block anyway)
    But you would probably be better finding another block really I think in your situation.
    All the best...
    Reply With Quote Reply With Quote
  5. 6th December 2017, 02:47 PM #5
    Pinelli's Avatar
    Pinelli
    Pinelli is offline Master
    Join Date
    Oct 2010
    Location
    Caloundra
    Posts
    870
    Total Downloaded
    0
    Mine's got a cracked head and I'm thinking of parting the rest out.

    Sunshine Coast might be a bit for for you to come for a block though
    Reply With Quote Reply With Quote
  6. 6th December 2017, 04:58 PM #6
    87County's Avatar
    87County
    87County is offline AT REST
    Join Date
    May 2007
    Location
    in the wild New England, NSW
    Posts
    4,918
    Total Downloaded
    0
    put an Isuzu 4BD1 in in?
    Reply With Quote Reply With Quote
  7. 7th December 2017, 05:22 AM #7
    Barkz71's Avatar
    Barkz71
    Barkz71 is offline Fossicker
    Join Date
    Sep 2017
    Location
    Lysterfield Victoria
    Posts
    84
    Total Downloaded
    0
    I havw a running engine i will part with. But Lysterfield Vic ... Not sure Im close enough...
    Reply With Quote Reply With Quote
« Hard to start start Td5 after remap. | Turbo core movement »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!