Thread: LRT-60-009 ACE special tool

Soooo! What’s the best way to do the front actuator, drop the whole assembly in one piece, do you let the diff hang or place stands underneath it. Thanks

Made my own ACE tool took this evening. Worked a treat.
I grabbed a M12 bolt, used an angle grinder to cut two slots with a thin cutting disc then replaced with a 6mm thick grinding disc to make the right size slot.
This slotted bolt then fits through the head of my Power built pass thru socket set. This socket undoes the top ACE nut while the slotted bolt holds the shaft steady.