Front windows "One Touch Down"

**Markf** · 24th February 2018, 09:36 AM

Hi all

Is there any way of getting rid of the "One Touch Down" behaviour of the front window switch ? It's only a minor annoyance I know but I'd like the window to stop moving when I let go of the switch.

**pop058** · 24th February 2018, 09:39 AM

Not sure about the D2 but if you tap the "up" button on a D1, it stops the window where it is.

**Markf** · 24th February 2018, 10:00 AM

Originally Posted by pop058

Not sure about the D2 but if you tap the "up" button on a D1, it stops the window where it is.

D2 behaviour is the same. I'd much prefer the behaviour to be "One Touch Up" though.

I've trawled through the Nanacom doco as well as the Nanacom itself and I don't think it can be done. Be nice if it could though. It'd be even nicer to have the same as my wife's '97 Subaru - window winders...

**discorevy** · 24th February 2018, 01:47 PM

Just hold the switch down for longer than about 1 second, it'll stop where you want it to

**V8Ian** · 24th February 2018, 01:57 PM

Mine appears to be a two stage switch, a light touch for control and a hard push for all the way. It does seem a bit finicky though.

**trout1105** · 24th February 2018, 02:13 PM

I would love it if I could get my D2a to do a one push UP

**Markf** · 24th February 2018, 03:00 PM

Originally Posted by trout1105

I would love it if I could get my D2a to do a one push UP

Ooooh so would I...

I've just spent the better part of an hour with the Nanocom and the doco and to the best of my knowledge there's no way to alter its behaviour. Bummer. One thing I did discover though is that the desired behaviour is exhibited below about 5 or 8 kph which seems to be the same speed as the "Speed Lock" locks the doors if it's turned on. The window switch behaviour remains the same regardless of the "Speed Lock" setting though.

My window switches are all single stage.

I'm only messing around with these things while I'm waiting for my AMC head to turn up which will possibly be mid next week depending on how long it has to rest at customs.

**onebob** · 28th February 2018, 09:01 PM

Originally Posted by discorevy

Just hold the switch down for longer than about 1 second, it'll stop where you want it to

Yup! that’s all it takes - i press and hold then count “one and two” and let go

**V8Ian** · 28th February 2018, 10:56 PM

Mine definitely has a two stage switch. A light touch allows me to control the window position but a full press sends the window all the way down.
I had a Fairlane that only operated in the auto-down mode, but that was due to a worn switch; perhaps that is your scenario.

**Markf** · 28th February 2018, 10:59 PM

Originally Posted by V8Ian

Mine definitely has a two stage switch. A light touch allows me to control the window position but a full press sends the window all the way down.
I had a Fairlane that only operated in the auto-down mode, but that was due to a worn switch; perhaps that is your scenario.

Hmmm I wonder if that's the case. A bit more fiddling is in order methinks.

Thread: Front windows "One Touch Down"

Thread Tools