D2a brake light issues

Upon startup the ABS is supposed to cycle,, I cant tell on mine but plenty confirm it...

Quote:

---

Originally Posted by Pedro_The_Swift

Upon startup the ABS is supposed to cycle,, I cant tell on mine but plenty confirm it...

---

You don`t hear it because of that thumping 4.6 [bigrolf]i cant hear it because of the Td5 rattle[bigwhistle]

[bigrolf][bigrolf][bigrolf]

any passenger who's feet reach the floor should feel it,,,[biggrin]

:o
we are all waiting for the dash lights to go out before actually starting,, right? [bighmmm][bigwhistle]:rulez:

If you start the engine with your foot on the brake pedal you 'should' be able to feel it.

Because your nanocom is showing a problem with only one wheel, I would suspect that the wire to the sensor has broken internally, so random connection until you turn a corner. Probably why a new sensor fixes the problem, because it comes with a new lead. Try a continuity test in the lead while moving it about.

cheers
Fred

Quote:

---

Originally Posted by Pedro_The_Swift

we are all waiting for the dash lights to go out before actually starting,, right? [bighmmm][bigwhistle]:rulez:

---

I did this today for the first time [bigwhistle]

I forgot every tine thereafter [biggrin]

Quote:

---

Originally Posted by Pedro_The_Swift

[bigrolf][bigrolf][bigrolf]

any passenger who's feet reach the floor should feel it,,,[biggrin]

:o
we are all waiting for the dash lights to go out before actually starting,, right? [bighmmm][bigwhistle]:rulez:

---

Just started doing that after reading this and what do ya know no more 3 amigos, thanks Pedro

Well, my work here is done,,[biggrin]
must be XXXX time [bigrolf]

Quote:

---

Originally Posted by rick130

If you start the engine with your foot on the brake pedal you 'should' be able to feel it.

---

X2. A grr grr feel