Thread: Removing rear side storage boxes.... hints needed

To remove boxes, there are two torque type screws, on the seat belt side. Take cover off where belt enters box, small cover (If fitted) and then a phillips head screw. remove seat belt cover out of the way and reach inside and undo the two screws. I used a small torque on a quarter drive ratchet,

Rear one same principle accessed by removing rear vent,pops out with a small screw driver, remove two screws again as above.

Originally Posted by dstevenson

Hi all,

Can some one give me a few hints on how to remove the side storage boxes. There are no obvious screws/ fasteners.

Thanks.

You wouldn't happen to be parting with the boxes would you? Have been after a pair.

Originally Posted by Bazzle218

To remove boxes, there are two torque type screws, on the seat belt side. Take cover off where belt enters box, small cover (If fitted) and then a phillips head screw. remove seat belt cover out of the way and reach inside and undo the two screws. I used a small torque on a quarter drive ratchet,

Rear one same principle accessed by removing rear vent,pops out with a small screw driver, remove two screws again as above.

Sorted, thanks for the tips. Always helps

Originally Posted by str405

You wouldn't happen to be parting with the boxes would you? Have been after a pair.

Hi, not at this stage, I want to for a sub in place of on... but I will hang onto them for now.

Cheers