Reply With Quote*If you are talking a NNN ecu then yes.
*Once its sync to the bcu and the disco is up and running, then upload a standard manual map to it.
*Which you can easily do if you have a Nanocom.
YarnMaster
SubscriberCan I put an auto ecu in a manual? I can change settings vis nanocom if needed. Like the injector codes.
Thanks
Julian
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
ChatterBox
*If you are talking a NNN ecu then yes.
*Once its sync to the bcu and the disco is up and running, then upload a standard manual map to it.
*Which you can easily do if you have a Nanocom.
Regards
Daz
YarnMaster
SubscriberThe one I am looking at came out of an automatic. It has a td5 Inside map. No good for the manual?
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
YarnMaster
Not good, for the engine to run it needs a fuel map for manual and even then is not 100% OK without an invasive intervention cos it misses the internal link for the clutch switch input... for more detailed info read the whole thread: D2 TD5 ECU - same ECU for automatic and manual vehicles?
Discovery Td5 (2000), manual, tuned
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks