How does the air control work? Just some solenoid air valves to switch between each end of the ram?
Printable View
How does the air control work? Just some solenoid air valves to switch between each end of the ram?
I was going to fit an old push pull valve from an old maxi drive setup. Just for the retro feel.
But will be going solonoid now that ill be using compressed air.
Quote:
Originally Posted by cjc_td5
It is a single action ram / single solenoid actuation with an internal return spring, however I have since added an external spring (9lbs/4kg pull) to always ensure positive “snap back” disengagement of the CDL as would occur if it were a dual action ram but without the added complexity of installation .....Quote:
Originally Posted by cjc_td5
How did you go getting 12v coils? 24v is easyQuote:
Originally Posted by onebob
Bought it from ARB...Quote:
Originally Posted by Discosux
https://uploads.tapatalk-cdn.com/202...37ed889bc3.jpg
https://uploads.tapatalk-cdn.com/202...e481a90af7.jpg
I bought a vacuum cdl kit from the UK.
Part of the kit is a replacement detent spring it is a lot softer than the original.
Quote:
Originally Posted by grizzz
Nice. didn't even think of that as an option
Might actually remove it totally. Not sure its needed with a ram actuator?