Thread: Nanocom glitch

Originally Posted by Bohica

I am trying to record data, like ABS voltages. I get a few few seconds worth and then an error message. "Error unable to perform the function" If I try to look at live data, I get the same error message. How do I fix this?
TIA

I think the Nanocom loses connection with the SLABS unit once the car is in motion.

It's possibly not the Nanocom's fault, it may lose sync because of the other systems communication with the SLABS.

You can’t log data after 8kmph

When I tested my D2 a few days back, I didn't bother to log it, just watched it driving around the block, and I think only up to 20k/h or so.
Mine was that curious reading in that voltages on one pair was zero and the other pair were 2.something, and also the weird speeds, one pair at 1.7k/h and another pair at car speed.

My understanding is that with errors like that, I'd have ABS light on at the least .. but nothing. Car drives normally, and ABS works as I found out yesterday on a corrugated section of road under brakes. (was daydreaming and missed the turn).