Thread: D2 bonnet scoop

come on guys, someone must have done this before

What do you really want a bonnet scoop for on a Disco?

if its for looks,, it'll have to be "hole to the front"
which will swallow water VERY well,,

however, the scoop when faced "hole to the screen" will extract hot air very well,,


didnt BB do this a while back?

As I understand it... you want to have bonnet scoops on the bonnet... but no holes through the bonnet.

In all honesty.....



I'd start with 22" rims and spinners.

and bigger aeriels,,

saw a disco in 4wd monthly(now action) cant remember which edition but someone may know.
it had a gu pooootrol one on it
did look

cheers paul when are our sighatures coming back?

BigBugga did it to his D1 using a GU scoop.His idea was to improve underbonnet temps being V8 powered and living in the Pilbara(one of the hotter parts of Aust)
It did look good.
I put one on our Triton when we had it,it was a GU copy from The Spoiler Factory(Armadale WA).It too looked great,and was for a purpose,I had fitted a turbo intercooled(top mount intercooler) motor from a newer Pajahero.
Andrew

My suggestion and I stress this is only a suggestion is as follows.......

Go out to your Disco and have a look at how nice it looks as standard.

Get underneith and notice that it has a high/low transfercase and live axels front and rear and maybe come to the conclusion that it should be used off road.

The realise that if you cut holes in the bonnet may limit it's 4wding potential in certain situations.

Then if still convinced that you need a vehical with bonnet scoops then you take it to your local Nissan dealer and trade down to a Pootrol with a nice shinny new scoop.

Just a suggestion