Results 1 to 4 of 4

Thread: 2001 Disco electrical

  1. #1
    Join Date
    Nov 2008
    Posts
    13
    Total Downloaded
    0

    2001 Disco electrical

    Hi,
    I have just bought a 2001 disco series 2.

    I have had trouble starting it. it unlocks fine with the remote but you cant turn the key in the ignition and the alarm beeps once. after stuffing around for five mins finally it comes off lock and starts.

    I am sure the above is linked all to the security system.

    Also have intermittent ABS light and TC light occasionally but both disapear after restarting.

    Can anyone recomend a brisbane hood lining repairer?

    I have been a devoted land drover owner for many years, ive had series 2 & 3 but this Disco while inexpensive to buy is a let down, hopefully once i get a few of the issues soughted it will be a reliable car.

    I would appreciate any help.

    Thanks

  2. #2
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    I don't know if you have an alarm fault or not but your steering lock/ignition key not turning isn't related to that.

    Sticking locks are common due to sticking/bent wafers. If graphite powder doesn't help then it will need to be stripped down & repaired/freed up.
    Scott

  3. #3
    Join Date
    Nov 2008
    Posts
    13
    Total Downloaded
    0

    Angry disco elecs

    Quote Originally Posted by Scouse View Post
    I don't know if you have an alarm fault or not but your steering lock/ignition key not turning isn't related to that.

    Sticking locks are common due to sticking/bent wafers. If graphite powder doesn't help then it will need to be stripped down & repaired/freed up.
    Yep it was a sticking ignition switch alright. Went to bunnnings to get some graphite tonight, got back to car and the ignition switch stuck again for good. I pulled apart the ignition (had to buy a chisel & hammer from bunnings to undo the security screws.) and manually turned the ignition switch to get it going. At least once the lock smith fixes the barrell all should be good??

  4. #4
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Quote Originally Posted by 01DISC2 View Post
    At least once the lock smith fixes the barrell all should be good??
    That will fix that problem .

    Now for your warning lights - this seems to indicate that there's a minor fault with the ABS system. If there's someone nearby who can read the fault codes, have it checked out.

    If no-one here can help with your headlining, give your local LR service dept a call. They'll have a trimmer they use all the time who should be familiar with LR trim (not that LR trim is a specialised job).
    Scott

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!