Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Largest standard tyres on DII in the world - eg on G4

  1. #1
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0

    Largest standard tyres on DII in the world - eg on G4

    Hi all. Unless and until Qld adopts the current Australian Code of Practice for mods including tyre sizes for genuine 4wd vehicles, currently anyone with 265/70/16 and above are technically illegal in Qld..having said that that tyre looks good and does not look oversize. The TORUM that covers it does not refer to the tyre placard that I can see and refers to no more than 15mm over the largest standard size by the manufacturer....does that mean in the world...arguably. So, I reckon from memory that the G4 Disco IIs ran a 75 profile tyre that was still about 235/245 wide...does anyone know the specs or can refer me to a site that contains same.

    Cheers

  2. #2
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,145
    Total Downloaded
    99.87 MB
    I'm not sure, but it was probably whatever was fitted to the Bowler Wildcat which runs D2 axles.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  3. #3
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,036
    Total Downloaded
    0
    They ran LT225/75 MTRs, in Aus at least - just very slightly larger than the 235/70s.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  4. #4
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,145
    Total Downloaded
    99.87 MB
    Are you sure? They look a lot bigger than that to me...

    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  5. #5
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,036
    Total Downloaded
    0
    Quote Originally Posted by Slunnie View Post
    Are you sure? They look a lot bigger than that to me...
    I know I don't wear glass if I can get away with it, but that doesn't look like a D2 to me!

    I used to have a magazine with a couple of pics of the G4 D2s from which I determined that they had to be 225s - not big or wide enough to be 245s.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  6. #6
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,145
    Total Downloaded
    99.87 MB
    As I understand it, the rule relates to the axle, so if you run LandCruiser axles you can run 31's, if you run Unimog axles you can run 44's etc, but it needs to be the largest for the axle. AFAIK thats why there was some excitement over a factory build by Toyota I think it was of a big tyred Prado or something for Iceland. The Bowler Wildcat uses Disco2 axles.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  7. #7
    Join Date
    Dec 2007
    Location
    South East Tasmania
    Posts
    10,705
    Total Downloaded
    0
    Anderson's @ Hervy bay have a Dakar-Bush rangie on a Disco chassis with very large tyres and is legal in Qld.

  8. #8
    dmdigital's Avatar
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    Try this information, used to be on the old Disco2 web site.

    Discovery 2 - Tyre Sizes
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]

  9. #9
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    Thanks fellas. Unfortunately in Qld its based on the largest size as fitted by the manufacturer on the particular vehicle being assessed - ie not on axles manufactured by the manufacturer; at moment no larger than 15mm above the max size as standard...unless and until the uniform code which currently is up to 50mm greater rolling diameter.

    Cheers

  10. #10
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,145
    Total Downloaded
    99.87 MB
    Sounds like you've answered the question yourself then. Whats on the placard.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!