Results 1 to 9 of 9

Thread: Jack problem

  1. 10th April 2009, 05:50 PM #1
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0

    Jack problem

    Hi all - made the mistake of using my LR D2 jack as a stand under my 2 tonn boat over the last 2 weeks...now I see its dropped down to the safety lump of wood an inch below where it was and oil everywhere. Now it wont pump up past where it was lowered to...is there any way of recharging the oil. I will use my 95 D1 jack for now....looks the same but I bet its bloody built better.

    Cheers
    Reply With Quote Reply With Quote
  2. 10th April 2009, 06:09 PM #2
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    went to rotate the tyres last weekend and found the jack wouldnt!

    filled it with left over engine oil and bingo!


    no oil leak in the engine bay or marks on the jack

    has it ever been used before???(not by me---)
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  3. 10th April 2009, 06:12 PM #3
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    Pedro - I have used it before and it has always worked very well. I cannot see where to fill it though...there is a thing on the side that looks like a female press stud....cant see how it would come out though....how did you do yours?

    Cheers
    Reply With Quote Reply With Quote
  4. 10th April 2009, 07:38 PM #4
    abaddonxi's Avatar
    abaddonxi
    abaddonxi is offline Moderator
    Join Date
    Jan 1970
    Location
    2780
    Posts
    8,257
    Total Downloaded
    0
    Check this out -
    http://www.aulro.com/afvb/projects-t...te-images.html

    Simon
    Reply With Quote Reply With Quote
  5. 10th April 2009, 08:12 PM #5
    4bee's Avatar
    4bee
    4bee is offline Cynical Moi?
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    That was another excellent post from Dave.
    Reply With Quote Reply With Quote
  6. 11th April 2009, 06:36 AM #6
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,499
    Total Downloaded
    0
    yeah, but I forgot to cover pulling the rubber filling plug out with a pair of needle nose pliers......
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  7. 11th April 2009, 06:37 AM #7
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0


    give yourself a good thrashing Dave
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  8. 11th April 2009, 09:27 AM #8
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    Thanks fellas. Great post Dave. It might seem odd to you Dave that it needed to be pointed out that oil fill cover was to be removed with needle nose pliers. Believe it or not I was raised (no pun intended given the topic) on cars and have helped re-build countless engines, diffs, gearboxes etc, but I have never thought to re-build a jack...I like it. I could have asked one of my family who are all mechanics, but I suspected that there might be some roveresque niceties with this jack like so many other things rover. Thanks for your help.

    Cheers
    Reply With Quote Reply With Quote
  9. 13th April 2009, 08:12 AM #9
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    I tried filling it and bleeding it using the guide linked to above. Unfortunately, no matter what I seem to do it does not go up at all now....and hisses a little air out of the top seal if I manually lift the ram up....I assume its stuffed but if anyone has any ideas I would welcome them...

    Cheers and thanks.
    Reply With Quote Reply With Quote
« Rip Off | home made light bar »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!