You're spot on George but those 19mm were 515mm freelength and netted about 6":pQuote:
Originally Posted by georgesadlik
Printable View
You're spot on George but those 19mm were 515mm freelength and netted about 6":pQuote:
Originally Posted by georgesadlik
thanks slunnie! thoes rates are wayyyyy to stiff for me and a 1.8t ute;)
i know what i want but i spose i'll have to go custom again.
cheers phil
Can you guys help me for a sec.
I just put in my new King springs for the front and they have measure up at 630 to 640mm from bottom of rim to guard, to me this is a 6" lift not a 4 to 4.5" which I wanted, but on there specs they read out this is what it should be!!,
Im trying to find my original heights from long ago, Height should only come up to 600 max for 4 to 4.5", I am right ??? Sorry for changing the subject a bit, I just have to tackle this tomorrow.
Yours
Mark
I'm not sure about bottom of rim to guard, the normal is hub to guard. Standard for most coils front and rear will be 485mm at the front and 470mm at the rear, and then you can roughly add 100 - 115mm to that measurement for what you should have got.
Mark,
On Mine:
Bottom of Hub to Guard - 610mm
Bottom of Rim to Guard - 790mm
Centre of Hub to Guard - 590mm
Just measured it then. Mines a 4" Lift as you know. With a bit of settle yours might be spot on 4" as well.
Thanks mate, confirmation for me as there stating other data, specs... See how we go tomorrow, as soon as they see it they will realize there off in some area
Hey Mark,
Will you be around tomorrow ?? Will pop over if you want.
IceFyre, Thanks, recon it will settle 30+mm??, maybe, I hope
Briz tomorrow, ring you in the arvo