Results 1 to 5 of 5

Thread: light force 240 blitz on ARB bar

  1. 19th May 2009, 06:52 PM #1
    johnrover Guest

    light force 240 blitz on ARB bar

    hi all

    just had a ARB winch bar fitted to my 04 D2 and was wondering if any has put lightforce 240s on the same particular bar and whether or not they fit?
    Reply With Quote Reply With Quote
  2. 19th May 2009, 07:55 PM #2
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0
    240HID's may be a problem due to the size and the mount pin position, but 240Blitz will fit fine.
    I have the Blitz on a Classic ARB bar. The Blitz sits well forward of its mount point allowing it to clear the limited space for a winch bar.

    Even the IPF 900's that ARB sell for the bar dont fit properly and give limited movement ability.

    I had to grind down the mount blocks to give me enough clearance to focus them upwards.

    Also, the 240Blitz has a Lightforce retro fit HID kit available now too. We are ordering some of these kits at work so will get one of the first ones to hit my floor and do some before and after shots!

    Cheers

    Andrew.
    Reply With Quote Reply With Quote
  3. 19th May 2009, 08:57 PM #3
    rathies's Avatar
    rathies
    rathies is offline Fossicker
    Join Date
    Dec 2008
    Location
    Perth
    Posts
    35
    Total Downloaded
    0
    I'm running a set of Lightforce 240 XGT's on my ARB non-winch bar and they are a perfect fit! there are a couple of spacer plates on the bottom of each light which can easily be taken off.
    Reply With Quote Reply With Quote
  4. 19th May 2009, 09:02 PM #4
    johnrover Guest
    cheers for your help! they look pretty good with the blue covers on them as well!
    Reply With Quote Reply With Quote
  5. 19th May 2009, 10:14 PM #5
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0
    Quote Originally Posted by rathies View Post
    I'm running a set of Lightforce 240 XGT's on my ARB non-winch bar and they are a perfect fit! there are a couple of spacer plates on the bottom of each light which can easily be taken off.
    RRC winch bars are not flat across the top like the non winch bars. www.therovergroup.com/img/parts/PARTS-ARB-RRC.jpg

    This limits the height of lights compared to non winch.

    The Disco S1 bars     www.expeditionexchange.com/vehicleprotection/DSC00745.jpg also have a limitation to them.

    D2 are also the same     https://www.expeditionexchange.com/v...ction/4610.jpg particularly when it comes to the side clearance of the uprights.

    Both of my Blitz's obscure the bar uprights looking from the front. I test fitted the XGT's before I bought the Blitz' and the XGT's did not fit.

    Winch bars are different in construction to std non winch bars and have slightly different dimensions.

    Cheers

    Andrew.
    Reply With Quote Reply With Quote
« CDL Idea, Your thoughts? | ECU for DISCO 2 TD5 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!