Results 1 to 6 of 6

Thread: Fuel flap rewire ???

  1. 2nd August 2009, 01:56 PM #1
    alien's Avatar
    alien
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0

    Fuel flap rewire ???

    Hey gang,
    Just wondering if any one has rewired the fuel flap buton on their D2.
    Don't like the idea off turning motor off as soon as I get to the bowser, particualy when traviling on the open road. Like the oil spinning in turbo when it's hot.
    Mine won't work with ign. on, only off or acc..

    TIA and Cheers.
    Reply With Quote Reply With Quote
  2. 2nd August 2009, 02:34 PM #2
    trog
    trog is offline ChatterBox
    Join Date
    Feb 2007
    Posts
    2,382
    Total Downloaded
    0
    with mine i find sometime if i push the unlock a couple times on the key fob it will open , more often than not when i dont want it open though!
    Reply With Quote Reply With Quote
  3. 2nd August 2009, 03:31 PM #3
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    The turbo stops abruptly when the engine is stopped if the engine is allowed to idle for even just a few seconds, so no harm done to the turbo bearings.
    I back-off the throttle for half a km or so before stopping to take the edge off the exhaust temp to do my bit towards avoiding carboning-up the turbo oilways.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  4. 2nd August 2009, 05:22 PM #4
    alien's Avatar
    alien
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    The turbo stops abruptly when the engine is stopped if the engine is allowed to idle for even just a few seconds, so no harm done to the turbo bearings.
    I back-off the throttle for half a km or so before stopping to take the edge off the exhaust temp to do my bit towards avoiding carboning-up the turbo oilways.
    You nailed my concern, thats what started me thinking about it.
    I wonder if it's as simple as changing the power feed to the switch?

    Cheers.
    Reply With Quote Reply With Quote
  5. 2nd August 2009, 08:06 PM #5
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    The switch provides an earth path to signal the BCU to provide an earth path to the solenoid. You would have to bypass the BCU and wire the switch directly to the solenoid.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  6. 2nd August 2009, 08:21 PM #6
    alien's Avatar
    alien
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    The switch provides an earth path to signal the BCU to provide an earth path to the solenoid. You would have to bypass the BCU and wire the switch directly to the solenoid.
    Thanks,
    I new it sounded to easy.
    If I ever have the BCU out it wouldn't hard to cut the wires and bypass it.
    I'm assuming that there wouldn't any thing else on those wires.

    Cheers.
    Reply With Quote Reply With Quote
« Crankshaft pulley/Harmonic Balancer/TV Damper | D2 Clutch Dance »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!