BROKEN WIRE

Quote:

---

Originally Posted by Redback

That wire can also be used for a turbo boost gauge or an oil pressure gauge for exact pressure monitoring.

Baz.

---

where does it go to ?

Quote:

---

Originally Posted by scarry

Had a good look at mine last weekend as we are going away shortly,one wire goes across the bell housing & the black conduit has all perished,i replaced it.

Also check the bunch of wires that go across the front of the engine & some go to the A/C compresser.The conduit on them had also perished & some were rubbing on something.I replaced the conduit on them as well.There's a lot of wires in the bunch.

---

Thanks Paul,

Did notice the exact thing you mention about the other wires accross the front. Was on a bit of a roll today checking stuff like that. Must be this strange dry weather we are having in Melb.

:cool:

Quote:

---

Originally Posted by Rosscoe68

where does it go to ?

---

I have mine connected to a VDO pressure sensor connected to my EMS1 to monitor Oil Pressure, but you can use a boost sensor with that same wire on the EMS1 to monitor turbo boost.


Baz.