Prop Shaft Arrgggh

Quote:

---

Originally Posted by crash

Had my uni's replaced today. Lucky the thing did not explode on me, it was that close too a catastrophic failure.
Started as a slight clunk when going from R to D but only occasionally checked the Unis but they appeared to be tight - this was about 4 weeks ago. A couple of weeks ago it started to make a squealing sound around the 2000rpm like a loose fan belt or a bearing going bad in the engine compartment. I could only hear it when driving, and under load, if sitting still and revved the engine you could not hear it.
Finally crawled under it to adjust the hand brake and had a look around and saw the uni almost hanging out.
Now to put the prop shaft back in tonight - that will be fun by torch light!

---

Same noises in mine,on light load/coast only,1500-2000RPM ;)
Cheacked it one weekend and fine, following fortnight no good.
Maybe 4 days in the sand with the diff lock on pushed it to far:(
So it's out and on the way to Preston tommorow:)
It has changable uni's on mine but i'll give to the experts.

The place I took mine to said he changes alot of uni's out of Hiluxes with a carden joint.

Does anyone have the part numbers to repair the prop shaft? bearing number and uni's. im in nhulunbuy and will need to rebuild it myself. or anyone have a spare they want to sell?

Quote:

---

Originally Posted by jtn

Does anyone have the part numbers to repair the prop shaft? bearing number and uni's. im in nhulunbuy and will need to rebuild it myself. or anyone have a spare they want to sell?

---

According to the H/S flyer above they are K5-A757 spicer uni's, but no centring bearing is available ;)

...

Quote:

---

Originally Posted by jtn

Does anyone have the part numbers to repair the prop shaft? bearing number and uni's. im in nhulunbuy and will need to rebuild it myself. or anyone have a spare they want to sell?

---

Hey there jtn, here is something i prepared earlier. All part #'s are in the pictorial. Uni's you can get through British Motor Imports and Centre bearing through Hardy Spicer. Good Luck :twobeers:

Link to Prop Shaft Rebuilt Pictorial:
Image hosting, free photo sharing & video sharing at Photobucket

Cheers

george sadlik

Quote:

---

Originally Posted by jtn

Does anyone have the part numbers to repair the prop shaft? bearing number and uni's. im in nhulunbuy and will need to rebuild it myself. or anyone have a spare they want to sell?

---

jtn-have a look at :
www.discovery2.co.uk
workshop-- propshaft rebuild
Thorough English gentleman as he is Urban even gives some Oz H/S part no.s for the uj's & centre bearing
Cheers
Discolaw

All the info is in The Good Oil,,,

Thanks everyone!