Thread: ECU upgrades

Hello all,
Hello DiscoDan,


it is NO problem to make a MSB-ECU work like a NNN-ECU.
I made this and it works 100%!

After changing a chip on the ECU - the ECU is fully flashable per software! The fuelmap and the settingmap could be changed per OBD-Port. Via Nanocom or ROVACOM without problems. You can use every Original-LR-Maps, free Italy-Tuningmaps or any other legaly Tuningfiles. (i.e. For the Defender you get the Italy-Maps with 140HP and 170HP. With no costs!)

The costs for changing the Chip are only about 50 GBP!
If you want only the Chip - if you could solder it in by yourself - only 20 GBP.
Don´t believe the Persons which say that it is not possible.
It works definitive 100%!

Sorry for my bad english...

and regards from Germany

Lucky

Hello DiscoDan,

in Germany we have the same problems with the ECUs. The newer NNN are very expensive. If you get one you have to pay 250-300€ (410-490 AUD) A good working MSB Ecu you get for 55€-120€ (85-130) AUD.
How are the prices in Australia?

I don´t know a link for the chips, because I found this out by my own. I only read one times in a LR-Forum that a ECU-repair-company can make this, but i got no more infos about.
So I used my old MSB-ECU to try this - and it works. In the past i made it some times again for friends of mine without problems. If you take the right chip and use the right file in the eprom-burner it can be done in one and a half hour to make a MSB-NNN-Clon-ECU. The chips for making a MSB-ECU work like a NNN you can get from me. I have a eprom-burner to play the needed software on the right chip. I can also write the needed original Landroverfile (or if you want a free italy tuning-map) direct on the chip or - after soldering the chip in the ECU with my NANOCOM to the ECU.

For more infos you can send me a PN.

Regards Heiko