Printable View
Hi Harro
Here are the SD settings I try to load but for some reason fails to take
NANOCOM - SLABS.APP - DISCOII SLABS setting file
param;value
Test Status;ENABLED
Transport Mode;DISABLED
ECU Calibrated;YES
Suspension Type;AIR
Left Stored Height;156
Right Stored Height;156
As for engine running no... it holds the manual height without the compressor toping up so no leakage
Hiya Pohm66
Seems there is a simple bug in the current SLABS software app where the "Transport mode" status is apparently inverted.
So you simply need to set it to "enabled" until we produce the next upgrade ;)
hiline:
Thanks for the coments of appreciation.
I made a recent post here which might help some with figuring out all the data.
http://www.aulro.com/afvb/electronic...p-reading.html
Thanks for the heads up Colin.....
Will give it a go.....
I'm up and running. :)
I received the email with the registration code within minutes early this afternoon.
I've found it to be intuitive to use....even cleared a few fault codes: one, I think, being a hangover from when I blew a rear brake light and another being the dreaded EGR actuator. Hopefully the latter won't reappear.
Thanks Paul and Colin and the rest of you guys for making it happen.
Mine arrived today :)
Registered and had response within minutes!
Sent from my backyard TeePee using smoke signals.
By my count, approximately half of the group buyers have let me know their Evos have arrived. With the exception of Neil in NZ, who probably has a few days more to wait, all the Aussies should have theirs by today or tomorrow.
If you have recieved your Evo, please let me know either via the forum or e-mail.
BTW: remember to register your Evo at the http://nanocom.it site not the Blackbox Solutions site.
Haven't worked out the refunds yet, but will do so soon... still catching up from stuff I didn't do over the weekend (for both Hard Range and my day job) when I caught up with some AULRO folks at Greendale.
Cheers
Paul.
Received last Friday - away for weekend and haven't had time to play with it yet.
Thanks again for the great service Paul
Mine arrived last Friday, again I haven't had much of a chance to play with it.
Registration was almost instantaneous, but the codes took longer to enter as I didn't initially realise I had to delete the ?????? marks.
I now have an SD card and will give the set-up a go.
Thanks for your help with the procurement and all the other work.
Received mine on Monday. Just picked up a SD card, so now off to play.
Rego codes came back within a couple of mins.
Thanks again to all who organised this group buy.
Now, if we could just have a manual.....
Maybe someone can tell me how to get it to turn on with the car when in instrument mode?
Basil135
I think all you need to do is press the screen for 5 seconds after you have started the car, that should then bring the screen to live (assuming you have already set instrument pac in the start up mode).