Results 1 to 5 of 5

Thread: Some help decyphering codes (Hawkeye)

  1. #1
    Join Date
    Jun 2010
    Location
    Here
    Posts
    36

    Some help decyphering codes (Hawkeye)

    Hi all

    I recently bought a Hawkeye, have two Disco 2s to play with, TD5 and an 8....so this should do both.

    However, the format that the codes are in....I can't find them anywhere here (yes...I searched....but not sure what I'm looking for)

    Example: 4114 - shuttle valve switch failure (****** yay!)

    Can anybody point me to a list of fault codes?

    Thanks
    DI

  2. #2
    Join Date
    Jun 2010
    Location
    Bayswater, Western Australia
    Posts
    719

    Option B

    Quote Originally Posted by D I View Post
    Hi all

    I recently bought a Hawkeye, have two Disco 2s to play with, TD5 and an 8....so this should do both.

    However, the format that the codes are in....I can't find them anywhere here (yes...I searched....but not sure what I'm looking for)

    Example: 4114 - shuttle valve switch failure (****** yay!)

    Can anybody point me to a list of fault codes?

    Thanks
    DI
    Let me guess, your 3 friends come out to play at random intervals? Look at option B in the good oil.

    I bet that your shuttle valve switches are fine, just need to permanently wire them back to their wiring loom. It is an easy check any way with a multimeter to test the actual switches.

    If you switch to the live data view mode you will probably see an intermittent open circuit being reported for the shuttle valve switches.
    Last edited by tailslide; 19th October 2010 at 09:10 PM. Reason: spelling

  3. #3
    Join Date
    Jun 2010
    Location
    Here
    Posts
    36
    Correct - My friends come out, then they run away....

    What I'm actually after, is some info on the format of the fault codes. For instance, the FC list here shows a format of say 1-36 = XXX whatever.

    I found another code list which lists them as say P10423 or something.

    THe Hawkeye spat out a four digit format....4114 was the shuttle valve switch, then there were some logged faults...can't remember exactly, but same format 3126, 3157 etc etc.

    Anyone know where I can get that list?

    Thanks
    Craig.

  4. #4
    Join Date
    Jun 2010
    Location
    Bayswater, Western Australia
    Posts
    719
    Hi Craig,

    I too haven't found a definitive list. Probably because all of the interesting settings are proprietary Land Rover codes rather than ODBII codes.

    Also looking for a decent "User manual" for the Hawkeye. There is scant information provided with the unit. Like how do you programe a new key fob???

    I have found the following:

    4016:Shuttle Valve Switch Long Term Failure
    4111:Shuttle Valve Sticking
    4113:Shuttle Valve Switch Dynamic Failure
    4114:Shuttle Valve Switch Electrical Failure
    4035:R/R Outlet Valve
    4075:R/R Outlet Valve Faulty
    4167:Pump Motor Failed

    There is a P code listing here: Land Rover - Standard OBDII fault codes


    Ron

  5. #5
    Join Date
    Jun 2010
    Location
    Here
    Posts
    36
    Does this help with the user manual? http://www.aulro.com/afvb/local_link...p=10&keyid=156

    Much better than the quick reference that comes with the unit lol

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!