Thread: [TD5 Maps] Are they all for D2 ?

Will look tomorrow

svdxe008 svtnp006 Disco manual european spec ecu no NNN500020
svlne006 svtnp003 Defender 90 manual european spec NNN 000120
svdxe008 svtnp005 Disco manual european spec Ecu no NNN 000120

Anthony

Sorry should have said, I got the info from nanocom site, they have a mapwizard that generates standard maps, the wizard has the numbers listed.
Anthony

Originally Posted by TOUTERRAIN

Sorry should have said, I got the info from nanocom site, they have a mapwizard that generates standard maps, the wizard has the numbers listed.
Anthony

Many thanks. I do not have minded at this wizard that I have too

Currently I have NNN500020 ECU on a Disco2 2000 TD5, and a svdxe008 svtnp006 map, that looks ok, but the ambient pressure mesures are really upper than really are. At 20 metres from sea level (I live in Barcelona), the AAP are the follow :

Could the high ambient air pressure values be due to using a 3 pin AAP with a post 2002 ECU (which expects a 4 pin AAP)?

Your AAP seems about right...
Around 113kpa is sea level atmospheric!

Furka,

I think the map you are running is designed for the EU3 spec TD5 motor.

Try loading an EU2 spec map:

NNN50020: STHDE021 STTDP010 (TD5, Manual, Euro, Discovery)

I think the EU2 map should correctly support the 3pin sensor, whereas an EU3 map requires a 4pin AAP. The NNN ECU's should be compatible with the earlier TD5's providing you have a suitable map loaded.

BTW Average sea-level pressure is 101.325 kPa!

cheers
Paul