Results 1 to 3 of 3

Thread: Nanocom Evo works with USB but not OBD after update

  1. 20th June 2014, 02:14 PM #1
    technophile's Avatar
    technophile
    technophile is offline Master
    Join Date
    Jul 2011
    Location
    perth
    Posts
    252
    Total Downloaded
    0

    Nanocom Evo works with USB but not OBD after update

    Hi Guys,

    i managed to borrow a nonocom evo of a friend. It was working when it was connected to the obd when i got it. I then noticed there was a firmware update (20140603n), so i updated it. Now it will not work when connected to obd. I have checked fuse 8 (ECU) and it is fine. Furthermore, the nanocom works when connected to the pc via a usb.

    2006 TD5 Defender

    Any thoughts
    Thanks
    Reply With Quote Reply With Quote
  2. 20th June 2014, 03:00 PM #2
    mools's Avatar
    mools
    mools is offline Master Supporter
    Join Date
    Apr 2010
    Location
    Perth
    Posts
    453
    Total Downloaded
    0
    No thoughts on that but if you're stuck for a nanocam to use you can use mine (just don't update the firmware).

    Ian.
    Reply With Quote Reply With Quote
  3. 20th June 2014, 04:19 PM #3
    technophile's Avatar
    technophile
    technophile is offline Master
    Join Date
    Jul 2011
    Location
    perth
    Posts
    252
    Total Downloaded
    0
    I have also noticed that my clock, interior light and radio are not working, yet the fuses is fine. I checked the radio fuse (number 17) and Fuse number (8) near the gear lever, and the fuse under the driver seat. All looked ok, and i even swapped them out to check.
    Reply With Quote Reply With Quote
« To Nanocom or Not to Nanocom | Dead Nanocom ... again »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!