Thread: Scanguage 11 on D4 and 2014 RRS

Plugged a Scanguage II in to my D4 SDV6.
You'll get water temp, volts, rpm, kph, intake air temp, all the basic stuff.
Nothing for transmission temp.
The OBD port is under the dash near your right knee.

Sometimes some one publishes the codes for you to enter to set up various displays

It may be worth contacting scangauge. to see if one exists for what you want for the D4


Good luck

Richard

I have searched the www and haven't found any codes that let me add extra parameters to the Scanguage for my LR D4

I've not been able to find any additional codes that work with my D3. That said, I'm still trying as they are laborious to enter.

You can expect all the standard obd2 outputs which are useful and a very good trip computer. If you're after alarms take a look at ultraguage.

I have mine on a suction mount on the rhs of the windscreen under my phone mount. My cable routes down under the door seal and under the dash so it is not visible but reasonable easily movable to the other car.

I did find that the trip computer functions on the Scan Guage never got close to the same numbers as the LR trip computer.
LR computer very good at underestimating fuel consumption -generally by 15%.
LR speedo 7-8% higher than Scan Guage and Tom Tom GPS.

Rh
They exist for other cars I was hoping they would for LR as well, sorry about that

I have a scan gauge 2 as well which I used for a pajero and had entered a number of additional monitors

I have not tried it on the d4, not sure if worth the effort.

Richard

This will have been covered and buried in a thread someplace but where can you get a list of the fault codes and what they mean?

I don't have a code scanner yet but considering one, this one seems reasonable.

any better units? Price concious obviously.

Paul
There is an iPhone app called fuzzy codes which gives explanation I believe
I have not used it though but may be worth a look

Richard