Results 1 to 5 of 5

Thread: Nanocom Noob

  1. 14th March 2015, 06:56 PM #1
    Disco Muppet's Avatar
    Disco Muppet
    Disco Muppet is offline Moderator Gold Subscriber
    Join Date
    Apr 2012
    Location
    Orange, NSW
    Posts
    7,965
    Total Downloaded
    0

    Nanocom Noob

    Howdy.
    I'm chasing an issue or two with my Td5 D2 auto, and as such have arranged a session with Slunnies nanocom.
    However....
    I have absolutely zero clue on how to work a nanocom!
    If I can get the files onto a computer as a CSV I can then send them to Dr Tombie
    So I assume that files are recorded to the SD card in the nanocom, and then with a reader they're transfered to computer?
    Are they transferred as a CSV file?
    I have a Mac Laptop with (Don't laugh) 10.5.8...
    Any assistance would be greatly appreciated as I'll have to do this myself when I get my own nanocom.
    Cheers
    Muppet
    The Phantom - Oslo Blue 2001 Td5 SE.
    Half dead but will live again!

    Nina - Chawton White 2003 Td5 S
    Slowly being improved

    Quote Originally Posted by Judo View Post
    You worry me sometimes Muppet!!

    Reply With Quote Reply With Quote
  2. 15th March 2015, 07:45 PM #2
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Cant help with the file recording Kermit.
    If you are chasing a Nannycom,there is a bloody good ofer in the group buys at the moment.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  3. 15th March 2015, 08:17 PM #3
    Disco Muppet's Avatar
    Disco Muppet
    Disco Muppet is offline Moderator Gold Subscriber
    Join Date
    Apr 2012
    Location
    Orange, NSW
    Posts
    7,965
    Total Downloaded
    0
    Need a job first Andy
    Have been given a loan of Slunnies nanocom
    Will go grab an SD card tomorrow.
    The Phantom - Oslo Blue 2001 Td5 SE.
    Half dead but will live again!

    Nina - Chawton White 2003 Td5 S
    Slowly being improved

    Quote Originally Posted by Judo View Post
    You worry me sometimes Muppet!!

    Reply With Quote Reply With Quote
  4. 18th March 2015, 10:15 PM #4
    dmdigital's Avatar
    dmdigital
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    The SD card may need formatting. If you do it on the Mac make sure to select FAT.
    As for the device itself it will run without the need of the computer. Once you've got it to write the file to the card the your Mac should be able to read the card like any other.
    Also cheap cards from Woolworths work fine.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
    Reply With Quote Reply With Quote
  5. 19th March 2015, 12:49 AM #5
    Rok_Dr's Avatar
    Rok_Dr
    Rok_Dr is offline Wizard
    Join Date
    Jan 1970
    Location
    Perth WA 6149
    Posts
    1,308
    Total Downloaded
    0
    Have a look on the nanocom website for their instruction manual. The old ones were a bit rough, but the documentation has improved in the last year. This will give you the details.

    Otherwise from memory, insert the SD card, connect the cable to the nanocom first and then connect to the vehicle. Once booted up navigate to the screen you are interested in. On that screen there will be a blue disk icon at the bottom. Tap that and it should ask for a file name. Needs to be <8 characters as it's DOS style. Once entered recording should start. When finished tap disk icon to finish, shut down nanocom, unplug from vehicle and then unplug cable from nanocom. Remove SD card, plug into computer and copy file over. The file format is not normal csv but you will be able to open it and tidy it up in excel.

    Cheers

    Steve
    Reply With Quote Reply With Quote
« Removal of Td5 Immobilizer | Scanguage 11 on D4 and 2014 RRS »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!