Thread: Nav on the move L320 2010+ via Nanocom

Not sure where you got assured from, but it was almost certainly no one from BBS as we know full well that to enable Nav on Move, you not only need to change the CCF but also need to flash the specially named NAV ON MOVE firmware in, re flashing and thereafter re flashing back to previous or respectively updated firmware.

At typically 50 Minutes a time, this can take almost 2 hours to do.

Originally Posted by BBS Guy

Not sure where you got assured from, but it was almost certainly no one from BBS as we know full well that to enable Nav on Move, you not only need to change the CCF but also need to flash the specially named NAV ON MOVE firmware in, re flashing and thereafter re flashing back to previous or respectively updated firmware.

At typically 50 Minutes a time, this can take almost 2 hours to do.

Thanks Colin, it was Adrian, on your forum.
I think we have the same system, have you done that procedure on yours?
Cheers

That will teach me to read everything properly before making a post.

I totaly missed your model and more importantly year, My bad ;-(

The proceedure, firmware and timing I detailed was for a D3 or Sport up to 2010 and is in respet to reflashing the firmware of the display in conjunction with the CCF edit.

From 2010, things are vastly different because updating of the display firmware is no longer done diagnosticaly via the OBDII connection and CAN BUS, but via an external Hard drive that is connected using Fire wire via a different custom connector.

As such I am unsure as to the applicability of a NAV ON MOVE setting in the CCF on 2010 on vehicles.

I have not attempted or investigated this on my own 2010 L320, mainly because the maps of the Sat Nav do not include Cyprus, at best they show me driving around in the sea