Thread: New Nanocom Firmware 2.04

Can someone point me to where to download the new 2.04 firmware please.

Is it at Nanocom where it's available too download

Baz.

Baz,

Yes it's from the Nanocom site.

Pretty sure by memory for firmware you need to access through the restricted area:

:: Area Riservata - Nanocom ::

You would have got some logon details when you first registered your Nanocom.

Cheers, Mark

Hi Forget the V2.04 and go for the V2.05
There are a few bugs fixed in the new one, injectoir coding,some SLS fixes, and wheel sensor readings,
Can save a lot of time and head-scratching experience.
Cheers
Vince

Yep just downloaded the 2.05 it loaded ok. Can anyone tell me what the "2,o5 English language file" is for? It seems to be in English anyway?

Dave

Hi dave
When you start to play around with the nanocom you will see a few spelling mistakes or double entries "look in DISCO ABS SLS > Utility "here you have two front right tests instead of one left & one right..
I heard Mattia from Nanocom and he explained that to develop a new firmware with the spelling mistakes takes up a lot of time, so they came up with language pack which is quicker and easier and can be personalised.
Best Regards
Vince

Download the new firmware, but buggered if it will load onto the Nanocom, keeps coming up with an error about not having some port

Any ideas

Baz.

check the usb port that the pc reconize's by thgis i mean Right click on "my Computer" then select "properties" then go on Hardware then hardware settings > Ports when you look at the list you should see the nanocom with the assigned port, this you must enter in the main Nanocom Giu on the top of the screen beside the question mark. IT'S IMPORTANT that they match when making any download.
Hope this has been clear
let me know how it goes
Cheers
Vince

In addition to the latest firmware (2.05) also download and install the latest PC software. You will end up with the desktop icon label "NanocomNew". It includes an upgrade so that you don't have to select the COM port number . With "Com Setting" set to USB the "COM port" is now able to be selected automatically as for any other USB device. (If you have a later model Nanocom with the USB rather than the RS-232 serial cable connection.)