Nanocom Q's

**davros** · 8th May 2009, 12:49 PM

Anyone know why the Nanocom doesn't seem to registrer correctly the selected gears on my disco TD5?
It registers "L" when car is in high range and the auto boxes gears don't pick up corectly (ie from memory "D" when it's in "P") etc.
I read a post about the same ages ago but can't find it

Cheers,
Dave

**jmkoffice** · 8th May 2009, 02:39 PM

Dave, this possibly a bug in either the Nanocom firmware or the Nanocom application on the PC. A couple of firmware revisions ago, I reported to the developers, some other ass-about readings, displayed by the unit. I haven't checked to see if they have resolved these yet....

To give you an example, the transit mode query was reversed and when raising and lowering the rear airbag suspension, both raise and lower commands lowered the bags only.

Have you flashed the unit with the latest firmware release? Try this and see if the bug/s have been rectified.

Cheers

Johann

**davros** · 8th May 2009, 04:42 PM

Thanks jmkoffice I've got the latest version - haven't messed with ride height yet!

Dave

Thread: Nanocom Q's

Thread Tools

Nanocom Q's

Bookmarks

Bookmarks

Posting Permissions