Nanocom and D2 V8

**fatman** · 11th January 2010, 04:56 PM

And yes!! It works,i plugged nanocom in my mates V8,and cleared the faults, it works on all menus Valeo Bcu,Slabs Sls,Ace etc
I tried it both in stand alone mode and remote mode (connected to the laptop).

**dmdigital** · 11th January 2010, 05:19 PM

It should too, they are all common between V8 and Td5. Only the engine ECM is different.

**Redback** · 13th January 2010, 09:22 PM

Didn't work when we tried it, it wouldn't initialise.

Baz.

**fatman** · 14th January 2010, 12:08 AM

Hi.
Sometimes even on my Td5, nanocom acts strange,i try different methods,ign on and then off or i leave it on acc,depends what ecu you want to access i guess.
I think after some time on off position,the ecus stop communicating,anyway i first tested nanocom on stand alone mode,then i plugged the notebook and worked like a charm.
I can test it again if you wish,but on the same V8,not many Disco II 's here in Greece(i guess about 50-60 V8's and 20-25 Td5's)

**Pedro_The_Swift** · 14th January 2010, 12:28 AM

Originally Posted by fatman

Hi.
Sometimes even on my Td5, nanocom acts strange,i try different methods,ign on and then off or i leave it on acc,depends what ecu you want to access i guess.
I think after some time on off position,the ecus stop communicating,anyway i first tested nanocom on stand alone mode,then i plugged the notebook and worked like a charm.
I can test it again if you wish,but on the same V8,not many Disco II 's here in Greece(i guess about 50-60 V8's and 20-25 Td5's)

The ratio's about 8-1 the other way here in Oz,,,
strange huh!

**fatman** · 14th January 2010, 03:55 AM

The numbers aren't %,i am talking about the total number of disco II's in Greece - that is under 100 vehicles(my estimate).
Cheers.

Thread: Nanocom and D2 V8

Thread Tools

Nanocom and D2 V8

Bookmarks

Bookmarks

Posting Permissions