Results 1 to 3 of 3

Thread: oil leak 2001 v6 freelander

  1. #1
    Join Date
    Feb 2012
    Location
    Brisbane
    Posts
    19
    Total Downloaded
    0

    oil leak 2001 v6 freelander

    ok looks like i got a good oil leak from dipstick tube down at entry point ,

    cant really see how to pull it out for a look , seems to look like some oring seal down there ?

    any help would be great

    Hori

  2. #2
    zedcars Guest
    Hori
    Yank the wheel off and look into the engine bay from the wheel arch side, (in your case the driver's side.)
    There's not a lot of room what with the under belly tray and side splash skirts, but you can see it with a lamp.

    You will see the tube inserted into the sump (pan) extension near the cooler. This may also be the leak point and /or hoses??? All close -"ish" to the subframe rail.
    Remember if you get to pull it (dipstick tube) out you will get a loss of oil, so a catch tray is essential unless you want to be mopping up the lost oil!

    Remember safety and jack stand is essential if you are going to slither/bend under the car to work.
    The tube attachment is an insert, if leaking I would have the parts on hand for a quick repair.
    Best of luck
    Cheers Dennis
    zedcars

  3. #3
    Join Date
    Feb 2012
    Location
    Brisbane
    Posts
    19
    Total Downloaded
    0
    Yes i know where the leak is , i was asking how do i remove the tube to look at the seal .. it actually looks like it has popped up a touch and maybe this is why it is leaking ?

    i cant seem to push it back down any further than where it is sitting though ..

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!