Results 1 to 4 of 4

Thread: hill decent control

  1. 21st June 2009, 08:14 PM #1
    ken7475 Guest

    hill decent control

    my warning light for hill decent control comes on after driving approx 1o k any reason why??? ps ive not been using the hill decent mode at all. ! somes days it doesnt come on but it does on most days......help please
    Reply With Quote Reply With Quote
  2. 21st June 2009, 08:31 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    do a search on the 3 amigos.

    most common causes I see for it are

    1. dirty plug connections and stressed looms
    2. contamination on the tone rings or wheel sensors.

    other causes are

    electrical fault, abs module fault, pump block fault, pad squeal, RF interferance

    the easiest way to find it is to get it interrogated while the lights on
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 22nd June 2009, 07:50 AM #3
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    If you have an early manual Freelander, the wires are prone to breaking at the HDC switch on the gear lever. This might be the cause of yours as it's quite common.
    Scott
    Reply With Quote Reply With Quote
  4. 22nd June 2009, 04:53 PM #4
    BO00YA's Avatar
    BO00YA
    BO00YA is offline Fossicker
    Join Date
    May 2009
    Posts
    10
    Total Downloaded
    0
    Hey guys. This is so freaky, this happened to me today and i was about to start a thread on it.

    My amber warning light just came on for no reason today. I went 4x4ing today but i didn't use the HDC at all. The light turned on as i was driving home.

    Where abouts are the connections for the HDC so i can see if they are dirty etc..

    Blknight.aus, when you say get it interrogated do you mean by the dealer?

    Scouse, I saw in my service history receipts that this has been repaired before on my freelander. It states that HDC switch re-attached or something like that. Can i do it myself or do i need to take it to a dealer?

    Thanks in advance.
    Reply With Quote Reply With Quote
« Freelander`rear window | new Gasket for 1.8 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!