Results 1 to 3 of 3

Thread: SE 5 door Electric Window Assembly

  1. 30th July 2009, 10:39 AM #1
    xasoe Guest

    SE 5 door Electric Window Assembly

    Rear passenger door window jammed (open) and investigation revealed that plastic cable guide had collapsed, causing cable to jam on 'drum'. Dealer quotes $315 for new (regulator?) "You have to buy the complete assembly". Any ideas for componant parts of assembly or second hand?
    Reply With Quote Reply With Quote
  2. 30th July 2009, 12:18 PM #2
    SuperMono's Avatar
    SuperMono
    SuperMono is offline Master
    Join Date
    Feb 2008
    Location
    Dandenong Ranges - Victoria
    Posts
    626
    Total Downloaded
    0
    I had a similar issue and as I was out of work at the time decided to 'fix' it. Which basically means a combination of superglue, cable ties and ss wire holding everything back together. It has been like that for 6 months and I do intend to replace the broken bits one day..........whenever that is.
    It still works although I normally lock out the rear window controls in case kids get enthusiastic.
    Reply With Quote Reply With Quote
  3. 31st July 2009, 01:59 PM #3
    xasoe Guest
    Great minds ........ the super glue works (for the time being). In piecing it all back together I found that the wire control cable had stretched about 3cm which was obviously the cause of the problem in the first case. Cutting off one end and tying a knot tightened everything up and made it workable (again - for the time being).
    Reply With Quote Reply With Quote
« Restoring exterior plastic trim | TD4 Reverse switch harness »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!