- 
	
		
                        
                                
                                        
                                                10th June 2016, 02:36 PM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
		
			Crank motor without starting
		
 
			
				
					G'day,
 
 I need to kick the motor over to build oil pressure before it starts. I'm sure there's a fuse I can pull for the injectors but not sure which one. Or is there an easy to reach plug for the injectors? Either way, or other, I need to get the oil going through the motor before starting.
 
 It's a 2011 SD4
 
 Cheers
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                10th June 2016, 04:57 PM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Sounds like you need a set of bearings and a new oil pump. 
 Check on the back end or side of the injector pump and see if there is a solenoid with a wire going to it, I have no idea what you're motor is or looks like, but most diesel engines that are key start have a solenoid on the injector pump to cut fuel to stop the engine and allow fuel when starting, if present disconnect the wire, Regards Frank.
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                10th June 2016, 04:59 PM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Cheers Frank. The cars been sitting there for a few months without starting so better be on the safe side.
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                10th June 2016, 05:08 PM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
					
				
		
			
				
					A very non vehicle specific way of turning a motor over without starting is to disconnect the starter motor switching wire, then temporarily hot wire it to the battery with the ignition switched off.
				 
 
 
 
 
 
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				 Posting Permissions
				Posting Permissions
			
			
				
	
		- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-  
Forum Rules
 
			 
		 
	 
 
  
    | Search AULRO.com ONLY! 
 | Search All the Web! 
 | 
  
  
  
Bookmarks