Thread: bent steering rod again

The theory that they should be left in as a "weak link" is a load of BS

S.G. Leslie and sons, only speak to Mal 03 9459 2859

I'd envisage Rovacraft, that's advertised here, Stuart is also a member, could help to

Relocate the damper to the steering rod (front of diff). That gets it out of harms way too, then you can fit a 'regular' strengthened track rod.

Originally Posted by Scouse

Relocate the damper to the steering rod (front of diff). That gets it out of harms way too, then you can fit a 'regular' strengthened track rod.

Oh yea, this is preferable, but you'll need a Defender/County drag link to do so and weld a bracket to the chassis, also requires a Defender/County Damper

Or you can just buy a bolt on bracket, to suit your existing damper, not the best but the easiest option

Originally Posted by rovercare

Oh yea, this is preferable, but you'll need a Defender/County drag link to do so and weld a bracket to the chassis, also requires a Defender/County Damper

Or you can just buy a bolt on bracket, to suit your existing damper, not the best but the easiest option

I have a 'clamp on' bracket on my steering rod & a 'bolt on' bracket on the chassis. That way I can just use the standard RR damper.

A defender steering rod would be ideal but I'm tight so I used what I had lying around .

Originally Posted by Scouse

I have a 'clamp on' bracket on my steering rod & a 'bolt on' bracket on the chassis. That way I can just use the standard RR damper.

A defender steering rod would be ideal but I'm tight so I used what I had lying around .

Ah, ya see I'm also tight and had a county lying around

thanks for the replies, sorry to be so long getting back, had to work, which is usually no where near a computer.
thanks for the melbourne tip, but as i am on the gold coast i won't bother him.
i have heard there is a fella at caboolture [or up that way] doing them and also saw snake racing do stuff. it seems no one makes a replacement d1 track rod with the damper on it - they all seem to add a damper repositioning mod to locate it on the front rod.
any ideas as to why and is this a better option than the track rod mounting?

Maxi Drive did them , both drag link and track rod, both with or without brackets for dampner. I have MD links for both and run dampners on both. The rear dampner is not in great condition from hits but the front is much more out of the way. Most brackets to relocate to the front change to a Defender dampner which is not pin pin like the standard D1.

Maybe ring Rick to see if he happens to have one buried away, maybe try HiTuff, and then maybe MR as i think they took some of the MD stuff.