Thread: eShocks (USA) for Bilsteins . Good service and fast delivery.

Which ones did you get?

B46's or BE5"s?

I have been trying to find out the specs on the 2 so I can compare the differences, but cannot find it on the net. My 130 has B46 in the front and BE5 in the rear.

I want to order some 7100's and move the 130 billies into my 2door rangie.

CC

Hi CC,

I got BE5-6529's for the rear, and BE5-6540's for the front.

Don't know much about the 1700's but I gather they are much higher tech, and have an external cannister, and I am guessing they are much more expensive.....

You couldn't do me a favour and get the open and closed lengths before you fit them. I couldn't be stuffed pulling mine out to do this.

Still wont know the valving though.

I might go some Fox ones yet.

CC

How much if it is not a rude question?

Originally Posted by Dreamer

How much if it is not a rude question?

yeh, particularly the postage

Sure - the shocks were US$89 each, and postage was US$152. No troubles with customs or duty or GST or anything - came straight to my door.

BTW - If you only want the 110 versions, they are US$75 each.

HTH
David

The last time (about 3 months ago) I got 2x 7100 series off them I paid $357 US delivered in total. (Postage was $94)

cheers

Originally Posted by Col.Coleman

You couldn't do me a favour and get the open and closed lengths before you fit them. I couldn't be stuffed pulling mine out to do this.

Having a bit of trouble measuring the closed length. Those buggers sure are strong

Open length, from the centre of the rubbers are:
Front: 640mm
Rear: 600mm

Closed:
Front: 490mm
Rear - too damn hard to hold in & measure at the same time, and noone else in the house ATM to assist.

Hope the open lengths are useful.