d3, cant get replacement bull bar

Quote:

---

Originally Posted by twodoors

Mmmm you are right after a beer less induced look 'WE' appeared to have placed the bull bar a tad too far forward.... the shaped edge of the bar should have 'mated ' nicely to the wheel arch shape..... not the
step I am looking at!!!! But hey the beer was cold!

---

Is it just a case of loosening the bolts and re-adjusting where its positioned?

You have to remember that beer makes everyone play pool at the pub like a pro, so im sure it makes people fit a bullbar like a pro :D

Quote:

---

Originally Posted by Ace

Is it just a case of loosening the bolts and re-adjusting where its positioned?

You have to remember that beer makes everyone play pool at the pub like a pro, so im sure it makes people fit a bullbar like a pro :D

---

MMmm I was a little shy with the truth.... So busy trying to bend the wombat bar so I could fit in Philco's recovery points that 'we' forgot to fit the winch tray!.....

So it all needs to come back off!

Quote:

---

Originally Posted by twodoors

MMmm I was a little shy with the truth.... So busy trying to bend the wombat bar so I could fit in Philco's recovery points that 'we' forgot to fit the winch tray!.....

So it all needs to come back off!

---

we have all done dumb things like that, i fitted a new set of springs to a friends disco and clean forgot there are springs for front and rear :angel:

Didn't someone note on another thread that ARB D3 Sahara bar would fit D2 with D2 mounting kit?

Hi guys
ARB only make a bulbar for D3 Diesel motor versions.
TJM do an alloy version for D3 diesel.
DON'T ask me why petrol versions don't need a bull bar!
I got an ARB steel bar fitted to my D3 petrol by Triumph Rover Spares in Adelaide. They did a great job for less than the price of an alloy one from TJM. I would highly recommend them.
Grumpa

Quote:

---

Originally Posted by clubagreenie

Didn't someone note on another thread that ARB D3 Sahara bar would fit D2 with D2 mounting kit?

---

ARB haven't made a sahara bar for the d3. I keep asking but they wont make one because of the low volumes for the sahara bar on the D2

Perhaps it was the 2a, can anyone explain why a 2a bar won't fit a 2?

that is ARB crap for you. :wasntme:

It will fit - the chassis is the same, but I think you have to do some minor trimming of the plastic trim under the headlights or at the bottom of the grill.

It is the same story with a RRC bar on a D1. It will fit becuase the chassis is the same but some minor modifications to trim may be required. I had a ARB built custom rrc bar on my D1 and it was an excellent fit.