mine used to loose some if going a lil fast, but seems to be ok now, its never disengaged tho, i asked them about it and htey said is the air seal in the diff that leaks, and if it gets worse bring it back
Hi all,just seeing if anyone has installed a ARB locker lately?Has anyone had any drama's with them not holding pressure or any other faults?
mine used to loose some if going a lil fast, but seems to be ok now, its never disengaged tho, i asked them about it and htey said is the air seal in the diff that leaks, and if it gets worse bring it back
Mine does sometimes, after a minute or two the pump will kick in and other times it never looses pressure.
Never disengaged and has been brilliant to use. love my locker.
Thanks for the replies,ive recently just had my front locked.And its sort of gone pair shaped fast lol.Ive had the rear in for ages with no problems at all.But this front one has been a pain in the butt for all concerned.The front is only 3-4 weeks old and is now blowing oil up the through the compressor solenoid for the front locker.So the compressor stays on the whole time.I guess im just a bit worried that it might do it again.
TAKE IT BACK! One thing you can say about ARB is that they do back up their products. That simply shouldn't be happening.
D4 SDV6, a blank canvas
What is the cost of both ARB lockers these days? I don't have the most recent cattledog and they don't post prices on their web site.
Si.
Bugger meee ... I won't be getting lockers for some time then! Hope they make you brekky in bed for that money.
Si
I had this happen to a locker.
It was due to the breather for the diff being blocked with crud, so the oil was forced out the solenoid as the heat and pressure built up.
I pulled the breather line off the diff and found that the banjo attachment was totally blocked up.
A clean out and I've had no oil out the solenoid since.
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks