Results 1 to 6 of 6

Thread: Help with protecting my 1959 Series II

  1. #1
    Join Date
    Jan 1970
    Location
    Brisbane, north of the river
    Posts
    1,924
    Total Downloaded
    0

    Help with protecting my 1959 Series II

    G'day Folks,

    I'm a little ashamed / embarrassed to be posting this as I don't like asking for help but I'm at an impasse.

    With all this rain my 3rd (or is it 4th?) 'temporary cover' for my 1959 Series II has collapsed. I've got the wooden beams and (hopefully) all the bits to make a more solid covering but need hands to help me put it all together.

    I think all I need is a hole digger, a cement mixer, some cement mix for the posts (the posts will be held above ground level by stirrups and a slope on the roof will be achieved by the stirrups on one side being taller than the stirrups on the other side), some hands and we're good to go. The floor will stay as gravel.

    Once that is up the next task is to get the bulkhead out of the Series II so I can replace it - my wife won't let me register her until I've replaced the bulkhead as the existing one is too rusty. Once I've pulled the bulkhead then I'll rewire her also.

    However the first step is to try and get her under some sort of protective covering.

    The vehicle is located at Bracken Ridge in the north side of Brisbane, Qld and I'll put up a BBQ lunch and a carton of beer to anyone who can help.

    If you can help, which day would be easiest - a Saturday or Sunday?

  2. #2
    Join Date
    Jan 1970
    Location
    South Yundreup,WA.
    Posts
    7,468
    Total Downloaded
    0
    Buy a good car cover that is lined first and secure thaty.Buy yourself a really good heavy duty tarp with good tie down points. They are not cheap at around $300 but will protect it well. Another option is to get a used truck tarp. Ask your local trucking firms if they have any damaged ones that are still big enough to cover a car. I did this with a bike, buggy and some tools for several months. Not much will get in. Will get you through until you get the shelter built and even then can be used as well.
    There are some really good fabric sheds now, but are around the $2k mark for a ggod one.
    2011 Discovery 4 TDV6
    2009 DRZ400E Suzuki
    1956 & 1961 P4 Rover (project)
    1976 SS Torana (project - all cash donations or parts accepted)
    2003 WK Holden Statesman
    Departed
    2000 Defender Extreme: Shrek (but only to son)
    84 RR (Gone) 97 Tdi Disco (Gone)
    98 Ducati 900SS Gone & Missed

    Facta Non Verba

  3. #3
    Join Date
    Dec 2008
    Location
    Victoria
    Posts
    1,777
    Total Downloaded
    0
    A mate of mine made a temporary but now permanent weather proof but not thief proof 'garage' for not much money at all. He got a huge panel of concrete type reinforcing mesh [250mm squares or bigger sort of thing] and bent it into a giant upside down domed 'U' type shape. Then he pegged it to the ground with tent pegs and covered it with some cheap big blue tarps tied on with cable ties. Voila – a weatherproof drive in /drive out car port with sides and built in a couple of hours. Later on he closed in one end and turned it into a drive in/reverse out garage.


    Lateral thinking with very few dollars spent.

  4. #4
    Join Date
    Sep 2010
    Location
    Qld
    Posts
    806
    Total Downloaded
    0
    Trouble is that whether it is temporary or permanent, usually once it is over 10 square metres, which I think it would have to be to adequately cover a Landrover (probably want 3m x 6m = 18 sq metres) it would need building approval and council permits, same as a shed. Would be best to check with your council first to see if it counts as a structure (which it possibly would being like a carport) or can be passed off as a shade sail. Most suburban councils will let you put up a 3x3 tool shed or less, once anything is bigger than that it normally needs approval (around $500 - $600).

    Last time I wanted to build a carport the kit was relatively cheap but all the council red tape was a pain so for not much more I went a proper shed. Same approval cost just slightly more to build. You can get some basic gal carports for around $1000 and put them up with 2 people in an afternoon.

  5. #5
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    i might be able to lend a hand.....bracken ridge you say, we must be neighbours

  6. #6
    Join Date
    Jan 1970
    Location
    Brisbane, north of the river
    Posts
    1,924
    Total Downloaded
    0
    Quote Originally Posted by weeds View Post
    i might be able to lend a hand.....bracken ridge you say, we must be neighbours
    Well yes and no. I grew up in Bracken Ridge and the vehicle stays at my mothers place as I don't have room at my place - which is why you may see me driving around there occasionally....

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!