Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: Vehicle hoist

  1. #1
    Join Date
    Jan 2008
    Location
    Brisbane
    Posts
    449
    Total Downloaded
    0

    Vehicle hoist

    Well Im getting a new shed and am looking at putting in a hoist

    My neighbour reccomends a 2 post single point release one as he learned from a mistake with his

    Im just looking for any pointers from those who have one

    Thanks

    G
    Defender 90 - WEE 90
    172-562 2a Workshop - Tassie Devil
    REMLR 331

  2. #2
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Just fitting mine last night, tufflift pro9d, will be the second one, you won't regret it one bit, don't forget a transmission jack and oil drain

  3. #3
    It'sNotWorthComplaining! Guest
    Quote Originally Posted by rovercare View Post
    , you won't regret it one bit,
    and all your landy mates won't either

  4. #4
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    This is the one we have and it is very good. The only recommendation I would make is to see if you can get one which is fully boxed - a section across the top as well. I will make this mod to ours sooner than later.



    Uploaded with ImageShack.us


    Erich

  5. #5
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Back in the UK, We have two 4 post Bradbury lifts with wheelfree's as the below pic I found on ebay uk. (I think one is 3000kg and the other 4000)

    I would personally go for a 4 post over 2 if you can, but both are better than none by a long way!


  6. #6
    Join Date
    May 2010
    Location
    brighton, brisbane
    Posts
    33,853
    Total Downloaded
    0
    Do you need a licence/ ticket to operate one at home. I'm thinking along the lines of insurance, and OH@S, Our local V.M.R. couldn't get the go-ahead to build a slipway used to haul the rescue boat out of the water until at least one member was licensed to run it,all to do with insurance and OH@S rules. Bob
    I’m pretty sure the dinosaurs died out when they stopped gathering food and started having meetings to discuss gathering food

    A bookshop is one of the only pieces of evidence we have that people are still thinking

  7. #7
    Join Date
    Jan 2008
    Location
    Brisbane
    Posts
    449
    Total Downloaded
    0
    Hi

    As for a licence I dont know but I have never heard any mention of it until now so I will look in to it

    Space wise it makes no real difference having the 4 post compare to the 2 post as I will likely be using it to parking space most of the time anyway, I was more thinking of practicality as with the 4 post I would need 2 jacks to get the wheels off the car etc but at around 2 time plus price difference is it worth it?

    Whats the thought on the imported brands? again My neighbour has one and has no complaints so I was thinking of going down that road as it not see a lot of use, that is until like was mentioned earlier " and all your landy mates won't either "

    G
    Defender 90 - WEE 90
    172-562 2a Workshop - Tassie Devil
    REMLR 331

  8. #8
    Join Date
    Jan 2008
    Location
    Brisbane
    Posts
    449
    Total Downloaded
    0
    I was thinking of one of these

    2 POST CAR HOIST - 4 TONNE CLEAR FLOOR , 2 YR WARRANTY | eBay

    or

    Car Auto lifts - hoists in Queensland, Quality HAPP102 | eBay

    I will research in to the 4 post hoists, might even look at a decent 2nd hand one

    G
    Defender 90 - WEE 90
    172-562 2a Workshop - Tassie Devil
    REMLR 331

  9. #9
    Rangier Rover Guest
    I have a imported Launch Tech 4000kg clear floor 2 post here. Same as Repco brand hoist only blue and cheaper with out the repco sticker + red paint.. Mine can be set up either symmetric or asymmetric also can be lowered 300mm for lower sheds such as mine. You then rely on the limit switch.
    Purchased it new from here..... LAUNCH TECH AUSTRALIA PTY. LTD. Very happy with it and well built. Power pack is excellent and even has a steel oil tank. These guys are in a big way and you have no issues with back up if needed....

    It serves me well, lifts the Land rovers and other 4X4s here with ease.
    Is very stable so long as vehicle is positioned correctly.
    I would find a 4 post a damn nuisance most of the time. Get in the way.

  10. #10
    Join Date
    Apr 2009
    Location
    Vic
    Posts
    342
    Total Downloaded
    0
    I had a 4 post in my last workshop and now that my new one is just about finished I'm also in the market.

    I will be going for a 2 post this time as the 4 post was too damn big and was annoying most of the time but was then extremely handy to use as a big bench.

    I will be making up 4 bench's, just small ones for doing wheel alignments and doing anything that requires loading the suspension up but other than that a 2 post will work fine for me.

    My last hoist was a Molnar, I have not decided on the next one yet.

    Cheers Casper

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!