-
15th January 2013, 10:15 PM
#1
Seat belt trouble
Hi land rover lovers, just joined the site. Own a 2003 td5 disco with a few bells and whistles. Great truck! Have a bit of seat belt trouble, drivers side seat belt is all the way out and won't retract..... Was wondering if anyone can tell me how to get to it?? Do the plastic covers just pop off or is it not that simple?? Any advice would be greatly appreciated. Cheers
-
15th January 2013, 10:29 PM
#2
My Landy doesn't have seatbelts
but I can only imagine that the cover would pop off or unscrew?
Oh, welcome aboard by the way
-
15th January 2013, 10:39 PM
#3
Cheers cobber, not a screw in sight
does kinda look like the plastic covers just pop off, but a little hesitant in case there's one or two screws hidden somewhere and I break something
-
15th January 2013, 11:15 PM
#4
No screws. Remove the door seals adjacent to the 2 trim panels covering the seatbelts. On the edges of the upper panel and you will see 4 small clips. ease those off the door pillar - then pull the trim inwards at the top to release the hidden clip and remove the panel. On the lower trim panels there are 6 clips down the sides ease those off the door pillar and then pull the panel inwards at the top to release the two hidden clips, lastly pull the bottom edge inwards to release the hidden clip down there.
Last edited by gazk; 15th January 2013 at 11:18 PM.
Reason: typo
-
16th January 2013, 01:29 AM
#5
Cheers Gary. Much appreciated. Will attack it in the morning. Legend mate.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks