$4 each is pretty good - locally here they charge $9.50 for tyres up to 1m diameter, and $33 for truck tyres.
As a result my wife is testing a few out this year for growing spuds in
If it did come to cutting them up, what would you use?
Steve
I have quite a few tyres lying around the place and yesterday decided to get rid of a few - I ended up with 6 medium to small car tyres and one old 9.00x16 off the 101.
Our local tip advertises that they will take "car" tyres for a cost of $4 each - sounded fine by me.
I turn up at the tip, money in hand and the response was -"we cannot take the tractor tyre" (meaning the 9.00x16) - I indicated that it wasn't a tractor tyre but a 4wd tyre - after a bit of argie bargie he relucatntly accepted the tyre making the point it was outside their policy guidelines which I now understand.
So how do an individual dispose of 4wd tyres when the tip will not take them. My experience is that tyre dealers will only take tyres that are taken in as part of the process of buying new tyres.
If the tip had not taken the tyre I did threaten to dump it in the bush but would have never done it (but it did help in the discussion) - I would have cut it into pieces that would have fitted into the garbage bin and over a couple of weeks sent it to the tip that way.
So where do you get rid of these things - I can understand why people who want to do the right thing often do not.
Garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
$4 each is pretty good - locally here they charge $9.50 for tyres up to 1m diameter, and $33 for truck tyres.
As a result my wife is testing a few out this year for growing spuds in
If it did come to cutting them up, what would you use?
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
angle grinder with lots of rubber smoke polluting the air!
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
You can only have so many car tyre swings in the back yard! Particularly if you have no tin lids.
Horse people often make feed bins out of larger tyres, so you could use the 9.00 16 for that.
You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
You could tie a length of rope to each tyre and then advertise it on Gumtree "Kid's tyre swing - free to collector"![]()
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
wasn't it trendy turning them into swans and planting a shrub in them
I cut up a couple of 32"muds, angle grinder for the bands then an old hand saw thru the rest of the carcass.
Its a time consuming process though.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
The issue is, there is no simple way to dispose of rubber, being a thermo-set polymer, it can only be cured once, and there is only so many children's swing sets needing a base. Rubber chipping is the only means that cured rubber can actually be recycled, unfortunately, the applications are not broad, making it a disposable material.
I can understand why bogans have created a tire pile at menai, although I will never contribute to it myself.
I wonder what the possibilities are for a chopped-rubber, powered electricity generator.... (I should stop publisising my ideas...).
(Our tyre all go to the tip, the scratch their heads when they see and 880x120 veteran car skinny though!)
Cheers
Will
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks