Thread: Where can I get footwell rust repair panels?

British Off Road do footwell repair panels

http://www.britishoffroad.com/

LRH

Thanks LRH but have tried them and they dont do them anymore, Also found they are hard to deal with at times. I asked them to me email prices for what I need and am still waiting. However they are most helpful over the phone.

Lobo

http://www.fwd.com.au/

sign up to their mailing list and they will send you a catalog

or even Paddocks in the UK - http://www.paddockspares.com

The freight is a bugger, but the parts are real cheap to start with.

Series ones are GBP8.95 - (Just a little over $20 each)!!!



LRH.

G'day ntguy, yuo can buy footwell replacements from 4wd in Melbourne but the difference between the ones you have bought and the ones you are going to replace well????!!!!, if you just want something to put your feet against well just get out the angle grinder with a 4" metal cutting disc and get into it but if you want it to look half original (because it will not come with the 3 vertical pressings in it, nor will it have the stiffening support pieces in it either) so these bits, i.e. the support pieces for the brake/clutch/steering brackets, you will need to remove these from the original bulkhead by drilling out the spotwelds and welding back insitu, it took me about 5 days of carefully removing/drilling out the spot welds etc and then rewelding it back into place to make it look like the geniune article and have no buckling/wobbling sounds as you operate the brake/clutch pedals, but it's your call it's your vehicle cheers and all the best with it. 8O :? PS I forgot to add the reason why it took me 5 days I'm a reg/nse 37 years with chronic back problems can't stay in a bent possie for too long someone who doesn't have a back problem maybe could do same job in 1-2 days cheers