I'm going to test it now.......
......no, the gas continues to flow on our Whirlpool gas top.
I too thought this was a requirement these days?
Usually its a wax style thermostat which is connected to the gas inlet shut off valve. This is the reason why you need to hold your hand on the gas dial for a few seconds before you release it.
Ethyl mercaptan is the stenching agent used. You can smell it in concentrations less than 1 part per million. So its a good warning device, but unless the gas was on all weekend, you are likely well below the lower explosive limit (LEL) of the gas. You need approx 2.1% propane (LPG) concentration in air to meet its LEL.
I'm going to test it now.......
......no, the gas continues to flow on our Whirlpool gas top.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
some of our gas deliveries the smell is so bad-even pongs when the gas is burning. fefill 9 KG and then have to wash the bottles to remove the external scent.
spend heaps of time checking and replacing pipes 3 way fridges-is it a leak cold-hot when driving-just replace everthing--after you swap the gas bottles for new ones.
My BBQ has no shut off-It has used outdoor warning label.
I wouldn't want a indoor stove that hasn't got modern electrical shut off.
Piezo electrical???
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks